Atlona AT-HDVS-200-TX-WP 2x1 HDMI & VGA Wall Plate Switcher with HDBaseT Ethernet Output

Atlona AT-HDVS-200 Overview
The 2x1 HDMI & VGA Wall Plate Switcher from Atlona features a two-gang, Decora form factor with an HDMI and VGA input, and an always-on 3.5mm audio connector. Signal support includes HDMI up to 4K/UHD @ 60 Hz (YUV 4:2:0 color sub-sampling), VGA input signals up to 1920 × 1200, embedded audio, and control signals which can be extended up to 328’. The switcher receives power from the AT-HDVS-200-RX scaler via Power over Ethernet, and together they create a standalone AV switching and control system with scaling. Display control and volume commands are transmitted via CEC, IP, or RS-232 to any display, control system, switcher, or other controllable device.

The wall plate switcher can be the central component of small, automated AV systems for classrooms and huddle rooms. The automatic display control turns on the display automatically whenever a source is connected. When the source is removed, the display turns off. Volume is controlled via the front panel or other control signals. Automatic input selection on the switcher works by sensing the presence of any video signal. With automatic input selection, manual control systems can be eliminated.

Using the AT-PS-POE (not included), the switcher can connect directly to Atlona HDBaseT receivers, such as the AT-UHD-EX-100CE-RX, or projectors with HDBaseT inputs, enabling simplified control and adding legacy VGA inputs at the HDVS.

2x1 HDBaseT Switcher
Features one HDMI input, a VGA input, and 3.5mm audio connector
Allows advanced HDMI display devices to be used with legacy VGA sources
Automatic Display Control
Automatically changes projector power state based on active or standby mode of switcher; control signals are transmitted via CEC, IP, or RS-232
Eliminates need for complex control system in AV systems; CEC enables control of low-cost consumer displays
Automatic Input Selection Using Video Detection Technology
Selects active input when sources are connected
Eliminates need for a complex control system in AV systems
TCP/IP and RS-232 Control of Switcher
Flexible control options for compatibility with third-party control systems; RS-232 controlled from HDBaseT connection
Reduces integration time and costs
Ethernet-Enabled, HDBaseT Extension
One Ethernet connection connects both TS and RX for control and management; transmits IP and HDMI up to 328 ft
Uses easy-to-integrate category cable for low-cost, reliable system installation; enables control of switchers (CLSO0824)
Front Panel Input Select Button
Overrides auto-switching when two active sources are present
Simple manual control allows presenter to maintain control of AV system
Front Panel Display On/Off Control
Offers convenient user features to override auto-switching when two active sources are present
Features display and volume control
Simple manual controls allow presenter to maintain control of AV system
Front Panel Volume Control
Remotely controls audio volume using TCP/IP or RS-232, and provides ‘Mute’ mode
Eliminates need for manual operation of display or use of IR remote control
Works with Atlona AMS
This IP-controllable product can be remotely managed by the Atlona Management System software
Integrates product configuration, management, and updates to reduce installation time and enable remote support