Hikvision DS-3E1105P-EI Smart Managed 4-Port PoE Switch, 100 Mbps, Blue

• Effectively increases available bandwidth on your network
• Lets you conveniently connect different networks to enable improved flexibility to your infrastructure
• Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports
• Built-in power supply to ensure all components are being supplied with accurate voltage
• Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree
• Management capability allows maximum efficiency and with unrestricted control
• Featuring Fast Ethernet ports to speed up the transfer rate up to 100mb/sec of large files and digital assets across your network
• Twisted Pair media support ensures maximum convenience and great usability
• Visualized Topology Management
• Built-in power supply to ensure all components are being supplied with accurate voltage

Specification

General
Shell Metal material
Net Weight 0.26 kg (0.573 lb)
Gross Weight 0.75 kg (1.65 lb)
Dimensions (W × H × D) 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity 5% to 95% (no condensation)
Relative Humidity 5% to 95% (no condensation)
Power Supply 54 V DC, 1.2 A
Installation Mode Desk-Mounted,Wall-Mounted
Max. Power Consumption 65 W
Power Consumption in Idle 0.9 W
Surge Protection 6 kV

Network Parameters
Ports 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
MAC Address Table 2 K
Switching Capacity 1 Gbps
Packet Forwarding Rate 0.74 Mpps
Internal Cache 768 Kbits

PoE Power Supply
PoE Standard IEEE 802.3af,IEEE 802.3at
PoE Power Pin End-span: 1/2(-), 3/6(+)
PoE Port PoE: Ports 1 to 4
Max. Port Power 30 W
PoE Power Budget 60 W

Software Function
Long Range
Ports 1 to 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
VIP Port
Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources
are insufficient.
Port Isolation
Ports 1 to 4: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can
communicate with ports outside the isolation group.
PoE Watchdog Ports 1 to 4: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for
load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 1 aggregation group.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which
will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Suppport 802.1w RSTP.
VLAN
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLAN.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions
supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.
System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP
addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network
cable length can be detected.
Support 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c for third-party management platform access.
Support port mirroring for fault locating.

Approval
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1:
2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
Safety
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN
62368-1: 2014+A11: 2017)
Chemistry CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)