Product Overview
Receive and convert an incoming HDBaseT signal to HDMI and connect it to a display, screen, or projector with the Omega 2x1 4K HDMI over HDBaseT Switcher/Receiver with Scaler from Atlona. This receiver offers connections for HDMI video with embedded audio, power, HDCP 2.2, EDID management, audio de-embedding, CEC pass-through, and IR, IP, and RS-232 control, all over a single HDBaseT connection. This model also features an additional local HDMI input for input switching options. It also features 4K upscaling and downscaling, selectable frame rate conversion, aspect ratio control, motion-adaptive 1080i deinterlacing, dual Ethernet ports with an internal network switch, and video test patterns. There are also two contact closure relays to control a display lift, electronic screen trigger, or motorized operation to create a full-featured AV control system.
HDBaseT is advantageous as it allows for longer cable distances than direct HDMI connections, while carrying other important signals along a single cable. The AT-OME-RX21 receives signals from up to 330' at 1080p with Cat 5e/6 cable or up to DCI/UHD 4K using Cat 6a/7 cable. You can pass through IP and/or RS-232 control via the HDBaseT connection and output control signaling via RJ45 or via the 5-pin RS-232 output.
Resolutions are supported up to DCI/UHD 4K, and HDCP 2.2 is supported in order to play protected high-resolution content. A power supply is included and the receiver sends downstream power via the HDBaseT connection, so no separate power supply is required for a compatible transmitter that supports PoE via HDBaseT.
